 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com Solid State Relay OCMOS FET PS7141-1B,-2B,PS7141L-1B,-2B 6, 8-PIN DIP, 400 V BREAK DOWN VOLTAGE, NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7141-1B, -2B and PS7141L-1B, -2B are solid state relays containing GaAs LEDs on the light emitting side (input side) and normally close (N.C.) contact MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7141L-1B, -2B have a surface mount type lead. FEATURES * 1 channel type (1 b output) or 2 channel type (1 b + 1 b output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6, 8-pin DIP) * Low offset voltage * PS7141L-1B, -2B: Surface mount type * UL approved: File No. E72422 (S) (PS7141-1B, PS7141L-1B only) * BSI approved: No. 8245/8246 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment Document No. PN10279EJ01V1DS (1st edition) (Previous No. P12814EJ5V0DS00) The mark shows major revised points. PS7141-1B,-2B,PS7141L-1B,-2B PACKAGE DIMENSIONS (in millimeters) PS7141-1B TOP VIEW 9.250.5 PS7141L-1B TOP VIEW 9.250.5 6 5 4 6 5 4 1 1. 2. 3. 4. 5. 6. 2 3 1. 2. 3. 4. 5. 6. 1 2 3 LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain LED Anode LED Cathode NC MOS FET Drain MOS FET Source MOS FET Drain 7.62 6.50.5 6.50.5 3.30.3 4.150.3 3.50.3 3.50.3 1.340.1 0.25 M 0 to 15 2.54 2.54 0.90.25 9.600.4 0.50.1 1.340.1 0.25 M PS7141-2B TOP VIEW 9.250.5 PS7141L-2B TOP VIEW 5 9.250.5 8 7 6 8 7 6 5 1 2 3 4 1 2 3 4 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET 1. LED Anode 5. MOS FET 2. LED Cathode 6. MOS FET 3. LED Anode 7. MOS FET 4. LED Cathode 8. MOS FET 7.62 6.50.5 6.50.5 3.30.3 4.150.3 3.50.3 3.50.3 1.340.1 0.25 M 0 to 15 2.54 2.54 0.90.25 9.600.4 0.50.1 1.340.1 0.25 M 2 Data Sheet PN10279EJ01V1DS 0.10+0.10 -0.05 0.10+0.10 -0.05 PS7141-1B,-2B,PS7141L-1B,-2B ORDERING INFORMATION (Solder Contains Lead) Part Number PS7141-1B PS7141L-1B PS7141L-1B-E3 PS7141L-1B-E4 PS7141-2B PS7141L-2B PS7141L-2B-E3 PS7141L-2B-E4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 50 pcs PS7141-2B PS7141L-2B Embossed Tape 1 000 pcs/reel Package 6-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7141-1B PS7141L-1B *1 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7141-1B-A PS7141L-1B-A PS7141L-1B-E3-A PS7141L-1B-E4-A PS7141-2B-A PS7141L-2B-A PS7141L-2B-E3-A PS7141L-2B-E4-A Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 50 pcs PS7141-2B PS7141L-2B Embossed Tape 1 000 pcs/reel Package 6-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7141-1B PS7141L-1B *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10279EJ01V1DS 3 PS7141-1B,-2B,PS7141L-1B,-2B ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Ratings Parameter Symbol PS7141-1B, PS7141L-1B PS7141-2B, PS7141L-2B Unit Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current *1 IF VR PD IFP VL 50 5.0 50 1 400 150 200 300 - - 300 mA V mW/ch A V mA MOS FET Break Down Voltage Continuous Load Current *2 Connection A Connection B Connection C IL Pulse Load Current *3 ILP mA (AC/DC Connection) Power Dissipation Isolation Voltage *4 PD BV PT TA Tstg 560 1 500 610 -40 to +85 375 mW/ch Vr.m.s. Total Power Dissipation Operating Ambient Temperature Storage Temperature 850 mW C C -40 to +100 *1 PW = 100 s, Duty Cycle = 1 % *2 Conditions: IF 2 mA. The following types of load connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 IL L - + VL (DC) Connection A IL VL (AC/DC) L L + VL (DC) - IL Connection B IL L IL + IL Connection C + VL (DC) - 4 IL *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 Data Sheet PN10279EJ01V1DS PS7141-1B,-2B,PS7141L-1B,-2B RECOMMENDED OPERATING CONDITIONS (TA = 25 C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25 C) Conditions Parameter Symbol PS7141-1B, PS7141L-1B Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED Off-state Current On-state Resistance Cout IFoff Ron1 Ron2 Turn-on Time *1 PS7141-2B, PS7141L-2B MIN. TYP. MAX. Unit VF IR ILoff IF = 10 mA VR = 5 V IF = 10 mA, VD = 400 V 1.2 1.4 5.0 V A A 0.03 1.0 VD = 0 V, f = 1 MHz, IF = 10 mA IL = 150 mA IF = 0 mA, IL = 10 mA IF = 0 mA, IL = 150 mA, t 10 ms IF = 10 mA, VO = 5 V, IF = 10 mA, VO = 5 V, RL = 500 , PW 10 ms 10 9 185 2.0 20 16 0.02 30 25 0.2 pF/ch mA ton ms Turn-off Time *1 toff RL = 1.5 k, PW 10 ms 0.2 1.0 Isolation Resistance Isolation Capacitance RI-O CI-O VI-O = 1.0 kVDC V = 0 V, f = 1 MHz 1.1 pF/ch *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor VO monitor Output 90 % Rin RL toff ton 10 % Data Sheet PN10279EJ01V1DS 5 PS7141-1B,-2B,PS7141L-1B,-2B TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 Maximum Forward Current IF (mA) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 80 200 60 40 100 20 0 -25 0 25 50 7585 100 0 -25 0 25 50 75 85 100 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 200 f = 1 MHz Forward Voltage VF (V) 1.4 IF = 50 mA 150 1.2 30 mA 20 mA 10 mA 5 mA 1 mA 100 1.0 50 0.8 -25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10-5 Off-state Leakage Current ILoff (A) LOAD CURRENT vs. LOAD VOLTAGE 200 IF = 0 mA IF = 10 mA TA = 85 C Load Current IL (mA) 10-6 100 10-7 25 C -4.0 -2.0 -100 0 2.0 4.0 10-8 10-9 0 100 200 300 400 500 -200 Applied Voltage VD (V) Load Voltage VL (V) 6 Data Sheet PN10279EJ01V1DS PS7141-1B,-2B,PS7141L-1B,-2B NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 3.0 Normalized On-state Resistance Ron ON-STATE RESISTANCE DISTRIBUTION 30 n = 50 pcs, IF = 0 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 0 mA, IL = 10 mA Number (pcs) 25 20 15 10 5 0 0 25 50 75 100 18 22 Ambient Temperature TA (C) On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT 1.2 VO = 5 V 1.0 Turn-on Time ton (ms) Turn-off Time toff (ms) TURN-OFF TIME vs. FORWARD CURRENT 1.2 VO = 5 V 1.0 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 Number (pcs) TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V n = 50 pcs, IF = 10 mA, VO = 5 V Number (pcs) 25 20 15 10 5 0 20 15 10 5 0 0.02 0.04 0.2 0.3 Turn-on Time ton (ms) Turn-off Time toff (ms) Data Sheet PN10279EJ01V1DS 7 PS7141-1B,-2B,PS7141L-1B,-2B NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-on Time ton Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10279EJ01V1DS PS7141-1B,-2B,PS7141L-1B,-2B TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.5 +0.1 -0 1.750.1 4.5 MAX. 16.00.3 7.50.1 10.30.1 1.550.1 12.00.1 10.40.1 0.3 4.00.1 Tape Direction PS7141L-1B-E3 PS7141L-2B-E3 PS7141L-1B-E4 PS7141L-2B-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 3302.0 1001.0 R 1.0 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10279EJ01V1DS 9 PS7141-1B,-2B,PS7141L-1B,-2B RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10279EJ01V1DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS7141-1B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |